L-17D Log Video Amplifier IC
ANADYNE's Fast Ultra Low Noise Preamp; Compatible with many different input topologies for maximum flexibility.
Two More Linear Amplifiers; Integrated amplifiers allow for very low propagation delay and high dynamic range.
Eleven Log and Linear Extension Stages; Many of the stages are tunable making very precise and custom non linear transfers possible.
Direct Summing Junction for Dual LVA Circuits; Two or more L-17D's can be used in combination for even more dynamic range.
Output Amplifier Stage; Our output amplifier can drive 50 ohm cables and now comes with a short circuit protection option.
Hermetically sealed and thoroughly screened for high reliability applications.
INTEGRATED DC-COUPLED LOG VIDEO AMPLIFIER L-17D#A, L-17D#B, L-2010
|Package Size||10mmx10mm, packaged, 2x3 mm die|
|Input Rail Voltages||+/-5V to +/- 7V|
|Operating Temperature range||-55C to 85C||The L-17D is burned in under power at 150C|
|Current draws at +/-6V||32ma, I-, I+|
|Dynamic range linear input||>92dBv positive input, 80dBv negative input|
|Max dynamic range with tunnel diode||50dB|
|Max dynamic range with Schottky detector||65dB|
|Log linearity||Tunable to +/-1/3db|
|Temperature drift||<0.5dB after adjustment|
|Input voltage noise density||1.2nv/√Hz|
|Input current noise density||<1pa/√Hz|
|Risetime (10% to 90%)||8ns||With full dynamic range, faster with 2 log stages eliminated|
|Transit time (50% to50%)||8ns||Variation in transit time over full dynamic range can be tuned to <2ns|
|Pulse to CW variation||<.0.2dB||A change in pulse duration from 10 ns to 1 ms (at high duty-cycle) does not affect pulse height for DC coupled designs. For pseudo AC coupled designs 90%+ duty cycles are possible.|
|Fall time to 50mv output||<50ns (with recovery nets)|
|Max output voltage||VCC-2.1V|
|Output drive capability||80ma|
|Quantity *(Pin out A or B)||1-9||10-24||25-99||100-999||1000+|
|The PC-17Dv3.1 Test and Evaluation Board||$75 each|
If you choose to export Anadyne products and technology, you are responsible for compliance with the relevant export regulations, including the Export Administration Regulations (EAR). The following information does not replace the EAR nor your responsibilities thereunder as an exporter. It is intended to assist you in the export of Anadyne products and technology from the United States and is not to be used for U.S. Customs purposes as it does not reflect origin-based, conditional Harmonized Tariff Schedule (HTS) numbers.
All Export Control Classification Numbers (ECCNs) and Harmonized Tariff Schedule (HTS) information provided here is subject to change. It is therefore your obligation as an exporter to verify such information and comply with the current applicable regulations. Anadyne makes no representations as to the accuracy or reliability of such information and is therefore in no way responsible for any damages or penalties suffered by you as a result of using or relying upon such information.
L-17D packaged parts: EAR99 HTS Code: 8542390000
L2010 die: EAR99 HTS Code: 8542390000
Terms and Conditions of Sale
Click here for Anadyne's Terms and Conditions of Sale.