PL200 Data Sheet

Spec Brief:

  
  	Package Size
    7mmx7mm, packaged, 2x2 mm die
    
      Input Rail Voltages
      +/-5V to +/- 8V
      
      Operating Temperature range
      -55C to 95C
      The PL200 is burned in under power at 125C
  
    	Current draws at +/-6V
    	28ma I+, 34ma I-
    	
    Dynamic range linear input
    >Over 90 dB
    
    Max dynamic range with tunnel diode
    50dB
     For a single channel. Multiple channels can be summed for extended range.
  
    Max dynamic range with Schottky detector
    65dB
     For a single channel. Multiple channels can be summed for extended range.
  
    Log linearity
    Tunable to +/-0.2db
    
    Temperature drift
    <0.5dB after adjustment
     Stable over extended temperature ranges (-55C to +95C)
  
  Input voltage noise density
   1.25nv/√Hz
    
    Input current noise density
    <1pa/√Hz
    
    Risetime (10% to 90%)
    4ns
    With full dynamic range, faster with 2 log stages eliminated
  
    Pulse to CW variation
    <0.2dB
    A change in pulse duration from 10 ns to 1 ms (at high duty-cycle) does not affect pulse height for DC coupled designs. For pseudo AC coupled designs 90%+ duty cycles are possible.

    Fall time to 50mv output
    <50ns (with recovery nets)
    
    Max output voltage
    VCC-2.1V
    
    Output slope
    adjustable

PL200 Data Sheet

Location

Contact

Package Size	7mmx7mm, packaged, 2x2 mm die
Input Rail Voltages	+/-5V to +/- 8V
Operating Temperature range	-55C to 95C	The PL200 is burned in under power at 125C
Current draws at +/-6V	28ma I+, 34ma I-
Dynamic range linear input	>Over 90 dB
Max dynamic range with tunnel diode	50dB	For a single channel. Multiple channels can be summed for extended range.
Max dynamic range with Schottky detector	65dB	For a single channel. Multiple channels can be summed for extended range.
Log linearity	Tunable to +/-0.2db
Temperature drift	<0.5dB after adjustment	Stable over extended temperature ranges (-55C to +95C)
Input voltage noise density	1.25nv/√Hz
Input current noise density	<1pa/√Hz
Risetime (10% to 90%)	4ns	With full dynamic range, faster with 2 log stages eliminated
Pulse to CW variation	<0.2dB	A change in pulse duration from 10 ns to 1 ms (at high duty-cycle) does not affect pulse height for DC coupled designs. For pseudo AC coupled designs 90%+ duty cycles are possible.
Fall time to 50mv output	<50ns (with recovery nets)
Max output voltage	VCC-2.1V
Output slope	adjustable